I like a lot of people have an unlocked iphone (not to be confused with a Jail broken one). So on installing the 3.0 update MMS was immediately available but I suspect, like me, for most it won’t actually be active (no little camera icon in Messages is an indicator if it’s working or not). If this is the case all you need to do is enter your MMS settings (a quick Google should provide you with the correct info – UK users can grab them here) via the steps below.
Access Point Name: general.t-mobile.uk
Data bearer: GPRS
Gateway IP (proxy) address: 184.108.40.206 (also 220.127.116.11)
Session mode: Permanent
MMS Message (Relay) Server URL: http://mmsc.t-mobile.co.uk:8002/
- Go to Settings > General > Network > Cellular Data Network
- Scroll down to the MMS settings and enter the correct information, my T-Mobile settings are shown in the image. Don’t worry if you don’t have info for Max Message size or MMS UA Prof URL – these are usually handled by the carrier so you can leave them blank
- Once the details are in place you need to exit Settings and restart your phone (this is the important bit as the phone won’t pick up the settings have changed unless you restart)
- If everything is OK on restart you’ll have a little camera icon next to your message input field in Messages (plus you’ll now have an option to send images etc by MMS)
It’s worth pointing out that if you have an unlocked iPhone you don’t need to do any of the ipcc file hacking that a lot of the “beta” articles seemed to indicate. The MMS option should be alreay present and just need configuring. If you’re with an official carrier like AT&T or O2 etc the process may be completely different as it seems to require hacking the ipcc file to set certain values so your mileage may vary.